In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.

The Swedish government corporation Försäkringskassan is currently undergoing large organizational changes. Modifications are made regarding the national insurance system and work procedures. In this study we have investigated the procedures of change with the aim of identifying which pedagogical processes in work procedures that enables organizational learning. Furthermore, the study aimed at gaining insight of how the work procedures enable organizational learning in a learning organization. We have utilized case study tradition to examine specific occurrences in their natural environment to thereby understand the matter of investigation.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

I det här arbetet undersöks det ifall ett CMS som befinner sig på webben kan få bättre exekveringstid ifall databaskod ifrån webbapplikationen istället flyttas till databasen i form av stored procedures. Det har skapats 4 stycken testapplikationer för att testa procedurernas effektivitet jämfört med hur det fungerar originellt. Testapplikationerna skickar en slumpad text till Wordpress funktionerna som har hand om inmatningar till databasen. Textsträngarna matas då in i databasen via antingen procedurer eller databaskod i webbapplikationen beroende på vilken version av Wordpress det är. I det här arbetet förklaras varför det kan vara intressant att använda sig av stored procedures och vilka för och nackdelar det finns med dem. Resultatet av det här arbetet tyder på att det kan finnas anledningar till att använda sig av procedurer vid större projekt men kan anses som överflödigt vid mindre arbeten. .

The Swedish government corporation Försäkringskassan is currently undergoing large organizational changes. Modifications are made regarding the national insurance system and work procedures. In this study we have investigated the procedures of change with the aim of identifying which pedagogical processes in work procedures that enables organizational learning. Furthermore, the study aimed at gaining insight of how the work procedures enable organizational learning in a learning organization. We have utilized case study tradition to examine specific occurrences in their natural environment to thereby understand the matter of investigation.

Background: Intimate relationship violence is physical, psychological or sexual violence that a person is exposed to in a relationship. There is a strong correlation between intimate relationship violence and mental health problems. A psychiatric ward at a hospital in Sweden, is working with a new routine. According to this routine every new patient should be asked about intmate relationship violence as a part of the admission interview.Objective: The objective of this study was to study how the healthcare personnel is working with the routine, and also to study response rate, interventions and how the work has developed over time.Method: A quantitative study with a retrospective and descriptive studydesign. One hundred and two medical records were reviewed.

Background. Anesthetic-related death in small animal anesthesia is about ten times more common than in human anesthesia. Recent research identifies the early postoperative period as particularly risky and highlights the need for regular and careful monitoring of the veterinary patient during this period. Objective. The aims of this study were to investigate whether there are standard procedures in terms of regulated routine patient observations and record-keeping during the early postoperative period at Swedish veterinary clinics, and if there are any guidelines for monitoring the veterinary patient during recovery. Methods. A small survey including ten Swedish veterinary clinics was carried out as well as a literature review. Results.

The swedish law against female genital mutilation (FGM) prohibits procedures that removes parts of the female genitalia and thereby makes permanent changes in the body. The problem with the wording of the law is that it may also apply to the western phenomenon cosmetic genital surgery. This paper therefore examines if cosmetic genital surgery should be covered by the swedish law against FGM, by making a critical comparing analysis. The paper begins with comparing FGM with cosmetic genital surgery to prove that there are more similarities than differences between the procedures. By using the theoretical perspectives universalism and postcolonialism, the paper then examines why, particularly in the West, there is a different approach to FGM than to cosmetic genital surgery, regardless of the similarities of the procedures.

The swedish law against female genital mutilation (FGM) prohibits procedures that removes parts of the female genitalia and thereby makes permanent changes in the body. The problem with the wording of the law is that it may also apply to the western phenomenon cosmetic genital surgery. This paper therefore examines if cosmetic genital surgery should be covered by the swedish law against FGM, by making a critical comparing analysis. The paper begins with comparing FGM with cosmetic genital surgery to prove that there are more similarities than differences between the procedures. By using the theoretical perspectives universalism and postcolonialism, the paper then examines why, particularly in the West, there is a different approach to FGM than to cosmetic genital surgery, regardless of the similarities of the procedures.

The swedish law against female genital mutilation (FGM) prohibits procedures that removes parts of the female genitalia and thereby makes permanent changes in the body. The problem with the wording of the law is that it may also apply to the western phenomenon cosmetic genital surgery. This paper therefore examines if cosmetic genital surgery should be covered by the swedish law against FGM, by making a critical comparing analysis. The paper begins with comparing FGM with cosmetic genital surgery to prove that there are more similarities than differences between the procedures. By using the theoretical perspectives universalism and postcolonialism, the paper then examines why, particularly in the West, there is a different approach to FGM than to cosmetic genital surgery, regardless of the similarities of the procedures.

As reptiles are becoming more common as patients in veterinary clinics, there is a need for creating new procedures regarding the care of exotic pets. The aim of this study was to develop a wound care routine adapted to reptiles, which can be used independently by a veterinary nurse due to the absence of prescription drugs or surgical techniques. The study was conducted by compiling the available research regarding wound care in reptiles, as well as research from related fields. The result indicates that polyurethane films and chlorhexidine-alcohol may advantageously be used on these patients. Hydrocolloid dressings and silver sulfadiazine dressings have adverse effects on wound healing and should not be used routinely in reptiles.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.